Plants For A Terrarium In A Light Bulb

Contents

Today it is very popular to make an eternal terrarium from an ordinary light bulb. I decided to try to do it with my children. The terrarium is called eternal, because it forms its own microclimate. Water evaporates, condenses and again enters the soil, nourishing plants and microorganisms. Plants consume water, carbon dioxide and sunlight. Plants release oxygen and decompose, thereby being a fertilizer for new plants. A whole living world in a simple incandescent bulb.

Video Eternal Terrarium from a Light Bulb

We will need

  • Out of service light bulb
  • Stones
  • Sand
  • Land
  • Plants

We make an eternal terrarium from a light bulb

First you need to remove all the insides from the lamp. We remove the metal contact and break the black insulator.

Using a screwdriver, break off the glass holder, and use tweezers to remove it from the lamp.

As a stand we will use a stone. You can show imagination and come up with some other stand.

Put a few drops of glue on the lamp and glue it at an angle to the stone.

To make it easier to fill the terrarium, we will make a paper tube. And with it, we fall asleep stones that will act as the foundation. And the second layer of sand.

Plants for the eternal terrarium

Now we go to the forest, there we will find all the necessary plants for the terrarium. Forest plants are more tenacious than indoor plants, so they will become wonderful inhabitants of our terrarium. We need moss and some plants with a small root system. Also in the forest we will collect twigs, stones, and most importantly. do not forget to take a little soil.

It’s okay if insects or earthworms get into the terrarium from a light bulb. They will also become residents of our micro world.

Fill the terrarium with soil before adding plants.

The next stage is creative. With enough patience, you can create miniature worlds in a light bulb by arranging stones, twigs and picking plants for a terrarium that will combine and complement each other.

Placing plants in a terrarium made from an incandescent lamp is easiest with tweezers and a small stick.

Do not forget to add a little water with a syringe. Without water, no organism can survive, which means we will not be able to get an eternal terrarium in a light bulb.

After all the plants are located inside, it is necessary to tightly close the terrarium. So that oxygen from the outside world does not get inside, and the water inside is not evaporated.

You can close it with a small stone, stick or acorn, which gives a very original look to the terrarium. And on top fill our cork with super-glue.

Today it is very popular to make an eternal terrarium from an ordinary light bulb. I decided to try to do it with my children. The terrarium is called eternal, because it forms its own microclimate. Water evaporates, condenses and again enters the soil, nourishing plants and microorganisms. Plants consume water, carbon dioxide and sunlight. Plants release oxygen and decompose, thereby being a fertilizer for new plants. A whole living world in a simple incandescent bulb.

Video Eternal Terrarium from a Light Bulb

We will need

  • Out of service light bulb
  • Stones
  • Sand
  • Land
  • Plants

We make an eternal terrarium from a light bulb

First you need to remove all the insides from the lamp. We remove the metal contact and break the black insulator.

Using a screwdriver, break off the glass holder, and use tweezers to remove it from the lamp.

As a stand we will use a stone. You can show imagination and come up with some other stand.

Put a few drops of glue on the lamp and glue it at an angle to the stone.

To make it easier to fill the terrarium, we will make a paper tube. And with it, we fall asleep stones that will act as the foundation. And the second layer of sand.

Read more:  Terrarium For Snails Achatina - How To Properly Equip A Dwelling For A Mollusk

Plants for the eternal terrarium

Now we go to the forest, there we will find all the necessary plants for the terrarium. Forest plants are more tenacious than indoor plants, so they will become wonderful inhabitants of our terrarium. We need moss and some plants with a small root system. Also in the forest we will collect twigs, stones, and most importantly. do not forget to take a little soil.

It’s okay if insects or earthworms get into the terrarium from a light bulb. They will also become residents of our micro world.

Fill the terrarium with soil before adding plants.

The next stage is creative. With enough patience, you can create miniature worlds in a light bulb by arranging stones, twigs and picking plants for a terrarium that will combine and complement each other.

Placing plants in a terrarium made from an incandescent lamp is easiest with tweezers and a small stick.

Do not forget to add a little water with a syringe. Without water, no organism can survive, which means we will not be able to get an eternal terrarium in a light bulb.

After all the plants are located inside, it is necessary to tightly close the terrarium. So that oxygen from the outside world does not get inside, and the water inside is not evaporated.

You can close it with a small stone, stick or acorn, which gives a very original look to the terrarium. And on top fill our cork with super-glue.

Terrarium. a small world, with its closed ecosystem, enclosed in a glass dome under which it can exist almost forever. Such an amazing thing in the house will not leave anyone indifferent. Today we’ll talk about how to create such a terrarium.

Training

We will make a terrarium from the most ordinary incandescent lamp. First we need gloves, pliers and a screwdriver.

Using pliers, we remove the contact point of the bulb and its fastening from the base. Simply put, this is a metal nickel in the lower base of the bulb and its insulation resembling black glass.

Next, we need to remove all the contents from the glass bulb. We take a screwdriver and forward the contents inward, then successfully remove it from the light bulb. Done. After this, it is desirable to treat the inner surface of the cap for sharp fragments.

You also need to consider the system of fastening your closed ecosystem. This can be a copper wire, hot melt adhesive on any flat surface or an ordinary nylon thread for hanging a light bulb.

But do not forget: even though the terrarium is a closed ecosystem, it needs sunlight. This must be considered when designing the mount.

The preparation of our future terrarium is completed, and now we can begin to fill.

Selection of the contents of the terrarium

At a minimum, for the normal functioning of the terrarium, it needs: gravel or small gravel as drainage, sand and earth to form the soil. All these materials are fairly accessible and sometimes roll right under your feet. Then you can pick up some small plants of your choice.

Plants For A Terrarium In A Light Bulb

For example, moss. this choice is due to the extreme survivability and durability of the species. Add a few more plants at random and some kind of wildlife, be it an acorn, a small cone or a shell, and much more that comes to your mind as an entourage.

Terrarium Filling

Since we will make our terrarium in a light bulb, and it will be very small, we suggest you make a funnel of paper, with which you can easily distribute bulk materials evenly over the surface of the inner wall of the glass bulb.

At the very beginning we pour gravel, then sand, and on top we cover everything with earth. The stage of soil formation is completed. Next we need tweezers. With this tool, we can easily distribute all other plants and objects in the soil of the newly made terrarium.

Plants For A Terrarium In A Light Bulb

Naturally, our plants will need moisture, so before sealing the bulbs we add a small amount of water from the syringe. Then we need to plug the base so that air does not penetrate from the outside. This can be done using a cut branch of suitable diameter in cross section and hot-melt adhesive. You can easily come up with your own options.

The principle of operation of the terrarium

The meaning of sealing a glass bulb is that the terrarium, thanks to a holistic, closed and autonomous ecosystem, is almost completely self-sufficient.

Read more:  Chameleons, Contents And Terrarium

The only thing he needs. it is sunlight. Almost the same processes take place in it as on our planet. There will develop its own life, the water will evaporate, settling with condensate on the walls of the vessel, then again drain into the soil.

Plants For A Terrarium In A Light Bulb

Some plants will grow upward, while others will begin to decompose over time, releasing carbon dioxide and making it possible to grow new ones. You just have to watch the process and enjoy the new acquisition made by yourself.

Terrarium. wonderful thing

After the last stage, you can breathe out calmly. the main work is completed. Now you can think about placing a bulb with earth in your room. It will be very interesting to look on the desktop or wall shelf, if there is at least partial access to sunlight.

Plants For A Terrarium In A Light Bulb

But in general, the choice is yours. experiment and make decisions yourself.

If you want to learn more about the process of creating a terrarium from a light bulb, then the following video will help you:

Take it to yourself, tell your friends!

Read also on our website:

Master Class reworked bulbs attached.
Well, here are the options for "filling", installation and decoration.

Just add water.

Plants For A Terrarium In A Light Bulb

Workshop on creating a small terrarium in a light bulb (lampoterrarium)

Today we will tell you how to create a miniature version of the terrarium right at home. This terrarium will consist mainly of a lamp and therefore we named it. lampoterrarium With the help of our master class on creating a small terrarium, you can give a piece of nature to yourself and your loved ones, which will not require special care, but simply will delight you and everyone around you with your appearance.

But before you start creating do-it-yourself lampoterrarium , I want to give some tips:

Wet soil in a confined space molds. Therefore, it is better to use sand or small pebbles, because water drains easily from them.
– For planting, it is advisable to use a plant Tillandsia (Tillandsia). "Aerial plants" that can grow without soil. This is a great choice for your tiny terrarium, because they take all the essential nutrients from the air (dust, rotting leaves and insect substances) through the leaves. But this does not mean that there is no need to water. The absence of roots means the absence of mold.

Living moss is very picky about the climate, so it may not survive in this environment. Therefore, instead of living moss, it is better to use dried, because it retains moisture better, which is very necessary for Tillandsia.
– Do not keep the lamp terrarium in the dark and in the sun. Find a place that will be sufficiently lit, but it will not be in direct sunlight.
– Do not forget to water and spray the plants from the syringe once a week to maintain vital functions. It is advisable to use soft water so that you do not have any leaks on the walls of the lampoterrarium.
– You can freely use small stones, glass fragments, or any other decorative materials to give your terrarium a character.

Now you can start manufacturing lampoterrarium

You will need some tools to make a tiny terrarium.

Let’s start with the selection of the light bulb. For the first time, it is better to use a large bulb.

We will remove the insides of the light bulb. This stage includes flying glass fragments, so wear glasses for the safety of your eyes. And do not forget to wear gloves if the dismantling of the insides of the light bulb is unsuccessful.

First of all, remove the metal tip at the bottom of the cap. Then proceed to the removal of the black part.

Now you can see the internal organs of the bulb

Using a screwdriver, we carefully break out the inside of the bulb.

With the utilities we get all the broken insides. If sharp fragments remain around the inner edge, carefully break them out.

And as a result we get a beautiful hole.

We proceed to the pleasant part of the manufacture of lampoterrarium.

Next, the sand must be dried. To do this, spread the sand in a thin layer on a baking sheet and dry in the oven at a temperature of 300 degrees (or you can calcine it in a pan). Thus, we additionally destroy various microbes.

Read more:  Who Belongs To The Terrarium

Once the sand has cooled, put a couple tablespoons of sand in a light bulb. To do this, use a funnel or a folded piece of cardboard.

To decorate the lampoterrarium, use dry moss.

Cut a small piece of moss and put in a lamp. Set it with a stick or long tweezers.

Carefully insert the plant into the flask. Be sure to insert with a thin end so as not to damage the leaves. Additionally, you can arrange beautiful pebbles, sticks, marble, etc. To create a beautiful composition you need to be patient. Experiment, it’s worth it.

Earlier I talked about how to make a garden in a bottle, now I want to bring to your attention an even more miniature version of the terrarium. lampoterrarium. You can surprise your near and dear ones by creating a tiny world in an ordinary light bulb.

But before I start creating the lampoterrarium with my own hands, I want to give some tips:

Wet soil in a confined space molds. Therefore, it is better to use sand or small pebbles, because water drains easily from them.

For planting, it is advisable to use the plant Tillandsia (Tillandsia). "aerial plants" that can grow without soil. This is a great choice for your tiny terrarium, because they take all the essential nutrients from the air (dust, rotting leaves and insect substances) through the leaves. But this does not mean that there is no need to water. Lack of roots means no mold

Living moss is very picky about the climate, so it may not survive in this environment. Therefore, instead of living moss, it is better to use dried, because it retains moisture better, which is very necessary for Tillandsia.

Do not keep the lamp terrarium in the dark and in the sun. Find a place that will be sufficiently lit, but it will not be in direct sunlight.

Do not forget to water and spray the plants from the syringe once a week to maintain vital functions. It is advisable to use soft water so that you do not have any leaks on the walls of the lampoterrarium.

You can freely use small stones, glass fragments, or any other decorative materials to give your terrarium a character.

Now you can start manufacturing lampoterrarium

You will need some tools to make a tiny terrarium.

Plants For A Terrarium In A Light Bulb

Let’s start with the selection of the light bulb. For the first time, it is better to use a large bulb.

Plants For A Terrarium In A Light Bulb

We will remove the insides of the light bulb. This stage includes flying glass fragments, so wear glasses for the safety of your eyes. And do not forget to wear gloves if the dismantling of the insides of the light bulb is unsuccessful

Plants For A Terrarium In A Light Bulb

First of all, we remove the metal tip in the lower part of the base with the ducks. Then proceed to the removal of the black part.

Plants For A Terrarium In A Light Bulb

Now you can see the internal organs of the bulb 🙂

Plants For A Terrarium In A Light Bulb

Using a screwdriver, we carefully break out the inside of the bulb.

Plants For A Terrarium In A Light Bulb

With the utilities we get all the broken insides. If sharp fragments remain around the inner edge, carefully break them out.

Plants For A Terrarium In A Light Bulb

And as a result we get a beautiful hole.

Plants For A Terrarium In A Light Bulb

Plants For A Terrarium In A Light Bulb

We proceed to the pleasant part of the manufacture of lampoterrarium.

Plants For A Terrarium In A Light Bulb

Next, the sand must be dried. To do this, spread the sand in a thin layer on a baking sheet and dry in the oven at a temperature of 300 degrees (or you can calcine it in a pan). Thus, we additionally destroy various microbes.

Plants For A Terrarium In A Light Bulb

Once the sand has cooled, put a couple tablespoons of sand in a light bulb. To do this, use a funnel or a folded piece of cardboard.

Plants For A Terrarium In A Light Bulb

To decorate the lampoterrarium, use dry moss.

Plants For A Terrarium In A Light Bulb

Cut a small piece of moss and put in a lamp. Set it with a stick or long tweezers.

Plants For A Terrarium In A Light Bulb

Carefully insert the plant into the flask. Be sure to insert with a thin end so as not to damage the leaves. Additionally, you can arrange beautiful pebbles, sticks, marble, etc. To create a beautiful composition you need to be patient. Experiment, it’s worth it.

Plants For A Terrarium In A Light Bulb

To revitalize the terrarium a little, you can install small plastic animals.

Plants For A Terrarium In A Light Bulb

And voila! You have a wonderful mini terrarium.

The following are other lampoterrarium compositions that you can recreate.